Monosoft
Cement-free lime plaster
sober, smooth appearance
for floors, walls and furniture.
About MonoSoft
MonoSoft is ClayLime’s most polyvalent lime plaster, offering a soft, sober and smooth finish for your entire interior: floors, walls and furniture. Its ease of application and adaptability to all surfaces, whether in new buildings or renovations, make MonoSoft the ideal alternative to traditional microcement.
specifics
Multi-surface
allowed in wet area
Thin +/- 1,5mm
Sustainable : lime based
Monosoft
In
DuvetMS.24
Seen at
Private house Monosoft(SE)
Monosoft
In
GreigeMS.25
Seen at
Rodolphe Janssen Art Galery(BE)
Monosoft
In
DuvetMS.24
Seen at
Stoot optiek(BE)
Advantages
- Ideal for a renovation project: very thin finishing layer (max 2mm).
- Create beautiful continuous surfaces.
- A beautiful mineral and natural view that creates a pleasant atmosphere.
- Possibly with underfloor heating.
- Very pleasant to walk on the floor with bare feet and it feels warm.
- The coatings are normally a maximum of 2mm, but on an old tiled floor or wall you have a little more due to the leveling layer. But you don’t have to break out the tiles.
- Ecolabel Sundahus.
MonoSoft Color Chart 2026
MonoSoft is available in 33 colors
MS.30
MS.30
Ardoise
MS.24
MS.24
Duvet
MS.39
MS.39
Tuffeau
MS.10
MS.10
Caoutchouc
MS.08
MS.08
Orge
MS.09
MS.09
Moka
MS.11
MS.11
Tabac
MS.26
MS.26
Ecureuil
MS.27
MS.27
Marais
MS.31
MS.31
Mouette
MS.32
MS.32
Pluie
MS.25
MS.25
Greige
MS.29
MS.29
Cuir
MS.47
MS.47
Sienne
MS.16
MS.16
Bourgogne
MS.22
MS.22
Chocolat
MS.21
MS.21
Dune
MS.48
MS.48
Canyon
MS.40
MS.40
Toscane
MS.20
MS.20
Taupe
MS.23
MS.23
Bison
MS.37
MS.37
Olive
MS.41
MS.41
Sauge
MS.58
MS.58
Lichen
MS.59
MS.59
Taïga
MS.60
MS.60
Fjord
MS.42
MS.42
Marée
MS.12
MS.12
Nuit
MS.33
MS.33
Orage
MS.64
MS.64
Bruyère
MS.34
MS.34
Corbeau
Use
interior floors, interior and exterior walls, bathrooms, furniture. Can be applied on shower walls.
Suitable
home, hotels, showrooms, shops, restaurants.
Thickness
+/- 1,5mm
Composition
Powder: hydrated lime, alumino-silicates, rock powders. Binder: VOC-free polymer binder named JES.
Application
Simple in 2 thin layers dry on dry. First layer with a foam roller. Second layer with a trowel. For more effect, you may apply the 2 layers with a trowel.
Packaging
Regular kit : 5kg powder + 2L JES for +/-10m²/kit.
Mini-kit: 1kg powder + 0,25L de JES for +/-3m².
Mini-kit: 1kg powder + 0,25L de JES for +/-3m².
Protection
Protective varnish adapted to each use. See instructions.
Pigment
The 33-colour MonoSoft card is made up of natural pigments tested and approved by ClayLime; the pigments are packaged in the quantities required for the 5kg or 1kg MonoSoft kits. Since mineral and natural pigments may vary slightly depending on production, for larger surfaces it is advisable to mix the pigments together.
Ecolabel
Our lime plasters can achieve various effects depending on the artisan’s skill and technique. The final appearance is influenced by several factors, including whether the plaster is applied in two layers with a spatula or if the first layer is rolled on with a foam roller. The method of polishing or sanding the plaster also plays a crucial role in the texture and finish. Additionally, the type of protection used, the choice of pigments, the pressure applied with the spatula, and the specific tools involved all contribute to the unique outcome of each application. For this reason, it is considered an decorative plaster.
High protection for floors, furniture and shower floors. Shower floor excluded.
- 1 coat of MonoSeal (single-component, water-based varnish) using an 8/9 mm microfibre roller .
- Drying time 12h min.
- Lightly destemmed with a grain size of 320.
- + 3 coats of PerfectsealNew PU two-component matt varnish (satin finish can be ordered) applied with an 8/9 mm microfibre roller.)
- Allow to dry for at least 1 hour between coats.
- Drying time for normal traffic: 48h.
- Drying time for heavy traffic: 72h.
High protection for walls
- 1 coat of MonoSeal with an 8/9 mm microfibre roller
- Drying 12h min.
- Lightly destemmed with a grain size of 320.
- + 2 coats of PerfecSealNew using an 8/9 mm microfibre roller
- Minimum 1 hour drying time between coats
Natural protection for shower walls. Shower floor excluded.
- 2 to 3 coats of PerfectSoap: natural liquid soap applied with a 9mm microfibre roller until saturated. 20m²/L. Minimum 1 hour between coats.
- Drying 12h min.
- + 2 coats of PerfectWax: 2-coat sponge wax + polish. 20m²/0.5kg. Minimum 1 hour between coats.
- Completely dry for 12 hours.
Regular maintenance: weekly maintenance with PerfectSoap or black soap is necessary. Reapply PerfectWax when small wet spots appear on the MonoSoft.
Breathable protection for walls
- 2 coats of PerfectProtect (water-based water repellent) to saturation, using an 8/9 mm microfibre roller.
- Allow to dry for at least 1? hours between coats.
Unleash Your Creativity
With all of our natural plasters, the creative potential is limitless. From Claystone to Creatina, you can achieve thousands of unique finishes and textures, tailored to your design vision. Whether you’re looking to craft sleek, modern surfaces or more intricate, artisanal effects, our plasters provide the versatility needed to bring your ideas to life. Claystone’s earthy elegance and Creatina’s refined, artistic touch allow for endless possibilities across walls, floors, furniture, and more.
Explore the examples below to see how our lime based plasters can transform any space.
Endless Possibilities
Monobronze
Bronze
Stripes
Marble
Layered
Creabronze
Natural stone
Stucco
Marble
A specific interior project?
ClayLime supports its customers and guarantees the best results in terms of aesthetics and performance. We can recommend the most qualified installers in your area.
Fill in our contact form and tell us a little more about your project. We will then be delighted to recommend the best installer for your project.